* Powerflex Front Bush Kit (Alloy Engine Mount Bracket) N/A for Renault Clio Mk3 Sport 197/200 (2005 > 12)

• Road Series Front Kit
• Whenever you see an "OR" in the text above, this means that there is a choice of bushes and you need to tell us which bush you need at the point of ordering
• Lifetime Manufacturer's Warranty
• Free UK Mainland Shipping

This Powerflex Bush Kit contains all of the following Bushes:

PFF60-801 - 2 x Powerflex Front Arm Front Bushes - Diagram Reference 1

AND

PFF60-802 - 2 x Powerflex Front Arm Rear Bushes - Diagram Reference 2

AND

PFF60-803-20.5 - 2 x Powerflex Front Anti Roll Bar Bushes - 20.5mm - Diagram Reference 3

OR

PFF60-503-20 - 2 x Powerflex Front Anti Roll Bar Bushes - 20mm - Diagram Reference 3

OR

PFF60-803-21 - 2 x Powerflex Front Anti Roll Bar Bushes - 21mm - Diagram Reference 3

AND

PFF60-526 - 1 x Powerflex Engine Mounting Rear Lower Bush (Alloy Bracket) - Diagram Reference 20

AND

PFF60-821 - 1 x Powerflex Engine Mounting Upper Bush Insert - Diagram Reference 21

AND

PFF60-525 - 1 x Powerflex Gearbox Mounting Bush Insert - Diagram Reference 22

AND

PFF60-822 - 1 x Powerflex Engine Mounting Torque Arm Upper Bush - Diagram Reference 23

NOTE - PFF60-801 - This is a non adjustable bush, for on-car camber adjustable bush use PFF60-801G.

NOTE - PFF60-802 - This is a non adjustable bush, for a caster offset bush with anti lift use PFF60-802G.

NOTE - PFF60-803-20.5 - This bush is half the length of the bracket and uses a spacer, for models with full bush with no spacer use PFF60-503-*.

NOTE - PFF60-503-20 - This bush is the full length of the bracket , fits all Megane II models and also 2.0L Clio III models up to May 2009, for Clio models with a spacer and shorter bush use PFF60-803-*.

NOTE - PFF60-803-21 - This part suits 21mm anti roll bars. This bush is half the length of the bracket and uses a spacer, for models with full bush with no spacer use PFF60-503-*.

NOTE - PFF60-526 - This part replaces the larger bush in extruded bracket to suit 1.4, 1.6 and 2.0L petrol engines and also 1.5L diesel engines. For vehicles with a cast bracket use PFF60-524 or a rubberized bracket use either PFF60-820 or PFF60-920. PFF60-526 is designed to allow a controlled amount of engine movement through voids in the material. The kit includes polyurethane inserts that can be fitted to further reduce engine movement, perfect for track days or vehicles running increased power.

NOTE - PFF60-821 - This is an insert and fits into the original mounting bush. Fits Clio III 1.5L diesel and 2.0L petrol engines including sport models. - Megane II, Scenic II and Grand Scenic II 1.9L diesel and 2.0L petrol engines.

NOTE - PFF60-525 - This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration.