BC Racing Coilover Kit M-26-V1-VM for Hyundai Santa Fe AWD (DM) (2012 on)

• Fits models with chassis code DM
• Rubber Top Mount on the Front
• Rubber Top Mount Or Non Top Mount on the Rear

These BC Racing V1 Series Coilovers are designed for Fast Road and Track Use. They use a large 44mm diameter piston in a 50mm diameter damper body to maximise oil capacity. This increases the volume of oil contained which in turn reduces the peak temperature and so significantly improves damper performance.

The lower spring platforms of these BC Racing coilovers are adjustable. This allows the car to be set up for corner weighting to achieve perfect balance and ensures that maximum tyre efficiency is achieved.

Ride height is determined by the position of the coilover bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment from near standard ride height to so low it wouldn't be drivable on the road. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height setting.

These BC Racing V1 Series coilovers feature 30 way damping adjustment that combines both rebound and compression in one adjuster for simplicity and ease of use. This adjustable facility allows you to fine tune the vehicle to meet the relevant conditions.

The dampers on these coilover units are made of black chromed steel to give superb durability even through the darkest of European winters. The oil in the dampers is of the highest quality, and is also Nitrogen Gas pressurised to improve the consistency and quality of the damping. BC Racing coilovers only use the highest quality cold wound steel for their springs. The springs are compression tested through over 500,000 cycles with less that 5% deformation.

BC Racing coilovers are made in a factory which is TUV certified, although they do not have TUV approval