The stock PCV on the TFSI engine is quite fragile and over time, or when running lots of boost, the diaphragm ... Read More
SPECIAL OFFER: Free Shipping to all UK Mainland Addresses (Excludes Highlands, Islands and Northern Ireland)
Make | Audi |
Model | S3 (8P) 2.0 TFSi |
Manufacturer | FORGE MOTORSPORT |
Manufacturer Part | FMPCVD1 |
Larkspeed Code | NEW99FMPCVD1 |
The stock PCV on the TFSI engine is quite fragile and over time, or when running lots of boost, the diaphragm inside can rip which can result in excessive blowby entering the inlet manifold at idle (smoking from the tailpipe) or a loss of boost when driving, which can cause other problems.
Traditionally we fit a catch can to remove the PCV entirely and catch the oil vapours from the engine.
But if you want a cheaper and simpler solution, you can delete the PCV and divert the breathing to the rear cam cover outlet only, by using our Forge Motorsport PCV Delete kit. Simply put, it removes the PCV and links the two internal ports together which emulates what happens inside the stock PCV when the engine is on boost, but without any fragile components to break or split. This completely isolates the inlet manifold from the cam cover.
The kit also blanks off the port on the end of the inlet manifold that used to go to the PCV, and replaces it with a boost gauge fitting kit. This comes complete with 3 vacuum hose takeoffs and blanking screws so you can run a boost gauge, water spray controller, or you can blank them all off, it's up to you. The kit comes complete will all parts necessary for installation and a full set of instructions.
This product will fit the following vehicles:
A3 (8P) 2.0 TFSI 200 PS (147 kW; 197 hp) CCZA 2009 > 2013
S3 (8P) 2.0 TFSI 265 PS (195 kW; 261 hp) BHZ/CDLA 2006 > 2013
TT (8J) Mk2 2.0 TFSI 155 kW (211 PS; 208 bhp) EA888 2010 >
TT (8J) Mk2 2.0 TFSI 155 kW (211 PS; 208 bhp) 2008 >
Leon Copa 2.0 TFSi 210 kW (286 PS; 282 bhp) EA113 2008 >
Leon FR 2.0 TFSi 154 kW (209 PS; 207 bhp) CCZB/CAWB 2009 >
Scirocco Mk3 R 2.0 FSI 265 PS (195 kW; 261 hp) EA113) 2009 >
Golf Mk5 GTI 200bhp
Golf Mk5 Edition30
Disclaimer: Any decision to install this product must rest solely with the purchaser as installation may adversely effect the manufacturers desired engine functionality or environmental pollution control measures. All responsibilities and liabilities remain with the customer and not Forge Motorsport.
The easiest way to order from Larkspeed is via our secure online ordering system. We accept most major credit and debit cards except American Express. We also accept PayPal.
Please ensure that you provide us with a valid telephone number and email address so that we can contact you about your order if necessary. Please also ensure that you fill in your vehicle details so that we know what car you are ordering for.
Once an order has been placed successfully, you will receive an automated response via email. If you do not receive an automated email from our website, this could mean that your payment has not been successful – in if doubt, please contact us on sales@larkspeed.com or 0113 264 3231
Telephone Ordering
If you prefer, you can also order via telephone on 0113 264 3231
For customers outside of the UK, please dial +44 113 264 3231
Email Ordering
Customers outside of the UK can email orders to sales@larkspeed.com. When payment is required, we can email you a secure card payment link or a PayPal invoice.
Worldwide Shipping
We can ship virtually every item on our website to almost every part of the world. However, the website can not calculate shipping for all countries, particularly where we need to ship via Air (generally outside of Europe). If the website is not calculating shipping automatically for you, then please email us for a shipping quote on sales@larkspeed.com
Deducting VAT
Please note that we can remove the VAT for all customers outside of the EU, and also for customers within the EU with a valid EU VAT Number.